Installation

DIN FRONT-MOUNT (Method A)

IMPORTANT!

BEFORE THE FINAL INSTALLATION OF THE HEAD UNIT, CONNECT THE WIRING TEMPORARILY, MAKING SURE THE UNIT AND THE SYSTEM WORK PROPERLY.

Insert fingers into the groove in the front of frame to remove it.

Insert the keys supplied with the old unit into the grooves on both sides of the old unit. The unit can be installed or removed from the dashboard using these keys. (Fig. 1)

Remove the half sleeve

Fig. 1

After inserting the Mounting Sleeve into the

dashboard, select tabs on top, bottom,

andsides, then bend them to secure the mounting sleeve in the dash board.(Fig. 2)

Fig. 2

Follow the diagram in Fig. 3 for installing the rear mounting strap to the head unit. The rear mounting strap will help keep the head unit from moving around inside the dashboard.

1.Dashboard

2.Nut (5mm)

3.Spring washer

4.Screw (5 x 25mm)

5.Screw

6.Strap

7.Plain washer

Fig. 3

8

Page 8
Image 8
Elite VRVD640G manual DIN FRONT-MOUNT Method a