Emerson Process Management IB106-340 Highlights of Changes, Effective May, 1998 Rev, Summary

	HIGHLIGHTS OF CHANGES
	Effective May, 1998 Rev. 2.0
Page	Summary
—	Modified existing manual to accommodate integrally mounted SPS 4000
	Single Probe Autocalibration Sequencer information.
—	Added locks for the electronic housing covers throughout the manual.
—	Changed test gas to calibration gas throughout the manual.
—	Changed reference gas to reference air throughout the manual.
Page P-1	Added symbols.
Page 1-1	Added product matrix information.
Page 1-4	Indicated that heater thermocouple and diffusion element are field re-
	placeable (paragraph 1-2.d.4).
Page 1-4	Added paragraph 1-2.d.9(c) to indicate a third method to calibrate and
	troubleshoot an Oxymitter 4000.
Page 1-10	Added 0 to 40% O2 range via HART. Added manual to calibration types.
	Updated signal specifications.
Pages 1-12 and 1-13	Added product matrix (Table 1-1).
Page 1-13 and 1-14	Added Tables 1-2, 1-3, 1-4.
Page 2-1	Deleted adapter plate disassembly recommendation from paragraph
	2-1b2.
Page 2-8	Changed horizontal to vertical in paragraph 2-1.b.5.
Page 2-9	Added CE compliance NOTE.
Page 3-2	Added 0 to 40% O2 range to paragraphs 3-1.c.2 and 3-1.e.2.
Page 3-4	Expanded paragraphs 3-2, 3-2.a, and 3-2.b to further describe logic I/O.
	Changed 1 Kohm to 330 ohm in paragraph 3-2.a.
Page 5-3	Added NOTE concerning HART Communicator warmup period.
Page 5-4	Identified logic I/O defaults in Table 5-1.
Pages 5-5, 5-6, and	Modified HART menu tree (Figure 5-3).
5-7
Page 5-8	Added WARNING about removing the Oxymitter 4000 from any auto-
	matic control loops prior to performing a calibration.
Page 5-9	Added paragraph 5-8 to explain the procedure to enter a timed calibra-
	tion via HART.
Page 6-1	Added overview paragraph 6-1. Expanded calibration paragraph (new
	paragraph 6-2) to include test gas checks and calibration types. Ex-
	panded calibration paragraph (new paragraph 6-2) to include calibration
	types.