Emerson Process Management IB106-340 Calibration Components Part NumberDescription

Oxymitter 4000

Instruction Manual

IB-106-340 Rev. 2.4

April, 2001

1

Table 1-1. Product Matrix (Continued)

Cont'd Code Language

1English

2German

3French

4Spanish

5 Italian

Code

Filtered Customer Termination

00 Specified as Part of Electronics Housing

Code	Calibration Accessories
00	No Hardware

01Calibration Gas Flowmeter and Reference Air Set

02Intelligent Multiprobe Sequencer (Refer to Table 1-3)

XX Single Probe Sequencer - mounted to Oxymitter 4000 (Refer to Table 1-4)

Cont’d 1 00 XX Example

NOTES:

(1)Recommended usages: High velocity particulates in flue stream, installation within 11.5 ft (3.5 m) of soot blowers or heavy salt cake buildup. Applications: Pulverized coal, recovery boilers, lime kiln. Regardless of application, abrasive shields with support brackets are recommended for 9 ft (2.74 m) and 12 ft (3.66 m) probe installations, particularly horizontal installations.

(2)Where possible, specify SPS number; otherwise, provide details of the existing mounting plate as follows:

Plate with studs	Bolt circle diameter, number, and arrangement of studs, stud thread, stud height above mounting plate.
Plate without studs	Bolt circle diameter, number, and arrangement of holes, thread, depth of stud mounting plate with accessories.

Table 1-2. Calibration Components

Part

NumberDescription

1A99119G01 Two disposable calibration gas bottles — 0.4% and 8% O2, balance nitrogen — 550 liters each, includes bottle rack*

1A99119G02 Two flow regulators for calibration gas bottles

*Calibration gas bottles cannot be shipped via airfreight.

When the bottles are used with “CALIBRATION RECOMMENDED” features, the bottles should provide 2 to 3 years of calibrations in normal service.

Rosemount Analytical Inc. A Division of Emerson Process Management Description and Specifications 1-13