Epson C I - 4 0 5 0, C I - 4 0 4 0 user manual Fanfold Displacement Fanfold DIS, Key Display

Printer Operation

This parameter covers a range of -15/60to +240/60 of an inch (0.42 mm), where "-" is up the page and "+" is further down the page (see also the table in Chapter 3.4 Configuring the Printer for VERT.POS.ADJ.).

Note: The set up of VERT.POS.ADJ. will become effective at the next page of the form. Therefore, it is recommended to perform VERT.POS.ADJ. set up as long as the paper is in the park position and before starting the print job.

-Fanfold Displacement (FANFOLD DIS) (91)

A continuous form can manually be displaced by this function when it is either correctly loaded at the park position or already fed and partly printed. The Fanfold Displacement mode can only be called up in the status READY or BUSY.

Note: The key has no effect when in the READY or BUSY mode.

As soon as the Fanfold Displacement mode is entered by pressing , the printer stops printing and changes into the LOCAL mode. The display

shows the message FANFOLD DIS with the value 0. By pressing (91)

or (92) a vertical displacement is possible.

Key Display

1

2

3

4

5

READY	1 ELQ
FANFOLD DIS	0
FANFOLD DIS	0, +1, +2, +3...
FANFOLD DIS	....+3, +2,+ 1, 0
READY	1 ELQ

Note: This parameter influences the line counter of the current print job and cannot be saved. A form feed (FF) sent by the application to the printer cancels all these settings.

2-5