![](/images/new-backgrounds/1223171/22317187x1.webp)
Printer Operation
-Top Row Keys
The Quick Macro Selection mode is entered when one of the top row keys
, | , | or | is pressed. From the left to the right macro 1 to macro | |
4 will be selected. Pressing of key | causes the printer to change in the |
If you press one of the above described key erroneously, press for correction.
Note: Macro selection means a change of all configuration parameters of the macro concerned.
-Lower Row Keys
In case a certain application requires a specific vertical positioning of the printout on a continuous form, two possibilities are provided for the READY or BUSY mode:
-vertical position adjustment VERT.POS.ADJ. with key (90)
-fanfold displacement FANFOLD DIS with key (91).
-Vertical Position Adjustment (VERT.POS.ADJ.) ![](/images/new-backgrounds/1223171/22317187xi11.webp)
![](/images/new-backgrounds/1223171/22317187xi12.webp)
(90)
This can be set differently for each macro to exactly position the printout in relation to the top edge of the form in use. Using this function, the TOP MARGIN and BOTTOM MARGIN settings are taken into account as well.
The parameter is part of the printer´s configuration set up memory and can be stored with the SAVE function.
The VERT. POS.ADJ. mode can directly be called up in the status READY
or BUSY by pressing key . In this case a set up is possible for the actually paper source of the selected macro. With TRACTOR V, or MANUAL V (and only for printer CI - 4050 also BIN x V (x =