Epson USN 52L, USN 52R manual Filling in a data header

Data set names Operation

The additional information is now stored together with the data set number. If the MEMO function was used for the selected data set, you will see the first 46 char- acters of the entered additional information instead of the menu bar in the PREVIEW mode (the first operating level).

Filling in a data header

In the two lower lines you will see letters, numbers and characters that you can use for the texts.

Above it, you will see four other lines: two lines contain- ing the labelings of the selectable fields, each of the lines below them are used for text entries. Depending on the data header configuration, some fields are al- ready automatically filled in with data from the currently active A-scan. You cannot select these fields.

To enter the required text, start by selecting a field and then the entry position in each case, and continue by selecting the character to be inserted at that position.

The entry position and character are always marked by a flashing cursor. You can enter all required characters in any chosen order.

Operation:

–Press the keys N or O next to the corresponding character string in order to select a character. The flashing cursor changes the string automatically. The highlighted character is immediately inserted at the entry position.

–Press the keys T or V to change the entry position within a field.

Krautkramer USN 52R/USN 52L Issue 05, 02/00 5-55