Epson USN 52R, USN 52L manual Storing a new probe, Operating the DGS

Operating the DGS

Storing a new probe

For general information on operation, please refer to the USN 52 R Operating Manual.

AAttention:

You cannot estimate any flaw sizes with the DGS op- tion of the USN 52R/USN 52L. You can only compare the reflecting power of a natural flaw with that of a theo- retical flaw (= disk-shaped reflector) at the same depth.

3.1 Storing a new probe

There are 13 probes including the corresponding param- eters stored in the instrument. You can program another probe.

–Switch to the second operation level: X

–Tag the function table DGS: T or V:

–Tag the left column of this function table: J or C

–Select no. 16 in the PROBE-#function.

DGS-18 Issue 02, 03/99 Krautkramer USN 52R/USN 52L Option DGS