Operation

Configuring the USN 52R/USN 52L

 

 

VALUE Displaying the measured value

The measured value at the selected location is dis- played:

EMTPY: No reading stored

xx.x mm: The stored reading

Clearing the measured value:

Highlight the right function group in the left function table with I.

If necessary, press Mfor about 3 seconds in order to clear the displayed reading.

FILE MODE Enabling the Data Logger

In FILE MODE you can enable or disable the Data Log- ger:

OFF: Data Logger is disabled.

THICKNESS: Data Logger is enabled.

HNote:

You can only enable the Data Logger when DATA LOG- GER is selected in COPY MODE (right function table).

Operation:

Highlight the right function group in the left function table with I.

With Malternately enable and disable the Data Logger.

5-48

Issue 05, 02/00

Krautkramer USN 52R/USN 52L

Page 93
Image 93
Epson USN 52R manual Value Displaying the measured value, File Mode Enabling the Data Logger, Clearing the measured value