Adjustment of the USN 52R/USN 52L

Operation

 

 

SET# Selection of data set

You are able to select the required data set number with this function. If necessary, an allocated data set name will be displayed at the same time.

Additionally, you can give each data set a name with which it is stored. Refer to Chapter 5.10 Entering and displaying data set names.

Operation:

Select a number between 1 and 140 (USN 52R) / 1 and 100 (USN 52L) with M.

STORE Storing the instrument settings

With this function you store the active instrument set- tings and the active A-scan under the number indicated in SET#.

If the data set is already allocated (symbol ■) you can- not overwrite it. You must firstly clear the old data set.

Operation:

Switch to ON with Mto store the setting. When the process is completed, the display automatically changes to OFF.

Acknowledge system safety prompt with F.

If required, enter the required additional information in the displayed MEMO menu (please see chapter 5.10).

Clearing the instrument setting

An instrument setting which is stored can be over- written after you have disabled the write protection.

You can reallocate the data set.

Operation:

Simultaneously press N and Oin the RECALL function.

Acknowledge system safety prompt with F.

Write protection is disabled. The symbol ■ is deleted. The data set can now be reallocated.

Krautkramer USN 52R/USN 52L

Issue 05, 02/00

5-15

Page 60
Image 60
Epson USN 52L, USN 52R SET# Selection of data set, Store Storing the instrument settings, Clearing the instrument setting