Epson USN 52R, USN 52L manual Selecting a File

Operation Storing measured values - Data Logger

Operation:

–Change to the second operating level and select the function group for the Data Logger.

–Set the required number of FILES in FILE NUMBER: SET #01 = 1 FILE, SET #02 = 2 FILES, etc.

–Simultaneously press Mwhen the required number is displayed. The memory is correspondingly set up.

You can store the measurement results. The Data Log- ger has the following presettings:

FILE MODE:	THICKNESS
MEASURE:	0 TO 1st
GATE LOGIC:	POSITIVE
COPY MODE:	DATALOGGER

Selecting a FILE

If the instrument was switched off or if the Data Logger was selected, then the FILE number last selected is automatically active. In order to select another number:

Operation:

–Change to the second operating level and select the function group of the Data Logger.

–Set the required number in FILE NUMBER.

The active status of each FILE number is displayed:

EMPTY:

File is empty.

ACTIVE:

File contains at least one reading.

FULL:

All measurement locations in this FILE are allocated.

ALL CLEAR:

You must first enter the number of FILES.

5-36 Issue 05, 02/00 Krautkramer USN 52R/USN 52L