Epson USN 52R, USN 52L manual Viewing stored readings, Clearing the measured values, Error

Operation Storing measured values - Data Logger

Viewing stored readings

You can select each measurement location and have the values displayed which are stored there. The follow- ing appear as measurement location status:

EMPTY:

no measurement stored

x.xx mm:

the stored values in the active units of measure

ERROR:

erroneous measured value. Storing must be repeated.

Operating in the A-scan mode:

Measurement location number (LOC) and value (VAL) are displayed in the measurement line.

–With T or V select the required measurement location. The value stored there appears at VAL.

Operation from the second operating level:

–Select the function group containing the Data Logger.

–Using Nor Oselect the required measurement location when in LOCATION. The value stored there is displayed in VALUE.

Clearing the measured values

You can clear the displayed reading and, if necessary, store a new value at this measurement location.

Operation in the A-scan mode:

–Select the value to be cleared as described above.

–Simultaneously press U and keep the keys pressed for about 3 seconds.

When VAL: EMPTY appears, then the measured value is deleted.

–If necessary, press A in order to store a new value at this measurement location.

Operation from the second operating level:

–Select the value to be deleted, as described above.

–When in VALUE, simultaneously press Mand keep the keys pressed for about 3 seconds.

When VALUE: EMPTY appears, the measured value is deleted.

–Press Ain the A-scan mode to store a new value at this measurement location.

5-38 Issue 05, 02/00 Krautkramer USN 52R/USN 52L