Epson USN 52L, USN 52R manual Copy Mode

Printing instrument settings and display contents Documentation

HNote:

In cases of doubt, refer to the technical specifications of the connected device. This is the only way to ensure error-free communication.

In the function COPY MODE of the same function group you select which data are to be printed:

•HARD COPY: Printout of the display contents

•REPORT: Printout of the Data Logger contents

•THICKNESS: Transfers the thickness value. When angle function is enabled, the values for S=, P= and D= are transferred.

•DATA LOGGER: The Data Logger is enabled for storage of the measured values. When Ais pressed, a measured value is transferred to the Data Logger.

•DISP+PDUMP: Prints the A-scan and a single-page test report with all settings relevant to the test.

•PARAMETER DUMP: Prints a list of all USN 52 R functions including remode codes and actual settings.

•MEMO DUMP: Prints the additonal information added with the active MEMO function.

You can also select the printer:

Press N and O simultaneously in the function

COPY MODE.

The function PRINTER SELECT appears. You can select the following printers:

•EPSON FX (also for EPSON LX-300)

•SEIKO DPU 411 (also for Seiko DPU 414)

– Select the required printer with M.

–Simultaneously press N and Oagain in order to exit the function PRINTER SELECT.

You are now in the COPY MODE again.

–By activation of A you can transfer the data to a printer or to the Data Logger.

Krautkramer USN 52R/USN 52L Issue 05, 02/00 6-3