Safety information, Introduction, Storage batteries | Epson USN 52R

Introduction

Safety information

1.1 Safety information

USN 52R and USN 52L have been designed and tested according to DIN EN 61 010 Part 1, March 1994, Safety requirements for electrical measuring, control and lab equipment, and was technically in perfectly safe and faultless condition when leaving the manufacturing works.

In order to maintain this condition and to ensure a safe operation, you should urgently read the following safety information before putting the instrument into operation.

AAttention:

USN 52R and USN 52L are instruments for materials testing. Any use for medical applications or other purposes is not allowed!

The instruments may only be used in industrial environ- ments!

Storage batteries

USN 52R/USN 52L can be operated with storage batter- ies. Please only use the power supply/battery charger unit UN 655 for storage battery charge.

Defects/errors and exceptional stresses

If you have reason to believe that a safe operation of your instrument is no longer possible, you have to dis- connect the instrument and secure it against uninten- tional reconnection. Remove the batteries if necessary.

•A safe operation is e.g. no longer possible

•if the instrument shows visible damages,

•if the instrument no longer operates perfectly,

•after prolonged storage under adverse conditions (e.g. exceptional temperatures and/or especially high air humidity, or corrosive environmental conditions),

•after being subjected to heavy stresses during transportation.

1-2

Issue 05, 02/00

Krautkramer USN 52R/USN 52L

Image 9

Epson USN 52R, USN 52L manual Safety information, Introduction, Storage batteries, Defects/errors and exceptional stresses

Contents

Technical Reference and Operating Manual USN 52R / USN 52L Index Introduction Function overview Basics of operation Configuring the USN 52R/USN 52L Recording a Distance-AmplitudeStoring measured values Data Logger Printing display contents and instrument Printing instrument settingsDocumentation with the PC program Interfaces 10-2 10-710-8 Issue 05, 02/00 Krautkramer USN 52R/USN 52L Introduction Defects/errors and exceptional stresses Safety informationIntroduction Storage batteries Preconditions for testing with ultrasonic flaw detectors Important notesSoftware Technical test requirements Operator training Limits of testing Wall thickness measurements with ultrasonicsEffect of the material of the test object Effect of temperature variations Assessing flaws using ultrasonicsMeasurement of remaining wall thickness Flaw boundary scanning method Echo display comparison method USN 52R/USN 52L Special features of the two versionsUSN 52R USN 52L Introduction Service Getting to know the adjustment functionsSpecifications and basic settings Remarks on this manual Descriptions of functions Layout of this manualOperating steps Keys Issue 05, 02/00 Krautkramer USN 52R/USN 52L Standard package and accessories Standard package and accessories Product type Description Standard package Required accessories Recommended accessoriesProduct type Description Order no GCH1 Recommended outside products Issue 05, 02/00 Krautkramer USN 52R/USN 52L Setting into operation Power supply Setting into operationPositioning the USN 52R/ USN 52L Inserting the batteries Setting into operation Battery operationAAttention Nickel Cadmium NiCd Left Alkaline Alk Right Using the battery charger LEDStatus Probe connection Starting the USN 52 R Switching on Screen saver Reset Basics of operation Basics of operation USN 52R and USN 52L USN 52L Scan display Display Functions on the display Indications beneath the A-scan Measurement lineAngle and X-VALUE Status line Menu line Keypad Function keysSpecial keys Special keys of the USN 52L for setting the display Accelerated adjustment Setting the functionOperational concept Changing the operating levels Selection of measured value for enlarged display Function keys Only USN 52L Keys for special functions Setting the measurement units Important basic settingsSet language Operation Issue 05, 02/00 Krautkramer USN 52R/USN 52L Operation Operation Function overview first operating level Adjustment of the USN 52R/ USN 52L Gain Gain adjustmentSetting the dB Step Selection of basic data Range Calibration rangeCoarse in steps Delay Setting the delay MTL VEL Setting the sound velocity FREQ. Frequency Setting the receiver Damping Electrical damping of the probe RECTIF. Setting the rectification mode Pulser Changeover of initial pulse Setting the pulser REP-RATEset the required percentage value with M Start Gate adjustment Thresh Determination of threshold Start Start of the gateWidth Width of the gate Start Gate start Calibration functions Zero Probe delay Adjustment of the freely selected valueMTL VEL Sound velocity Recall Loading of a stored setting Data set names and Memo mode in .10 onStoring data Store Storing the instrument settings Clearing the instrument settingSET# Selection of data set Displaying stored A-Scans preview Clearing all data Calibration of display range USN 52R/USN 52L calibration Calibration with a straight-beam probe Straight-beam probe with delay Calibration with angle-beam probes Known sound velocityUnknown sound velocity Flank mode Path errorCalibration with a dual T/R probe Higher sound velocity Automatic calibration Preparing the instrument for digital measurement PreconditionsGate Logic Recall of dB difference Set Amplitude to dB Threshold Calibrating the sensitivity B DAC/TCG Function group TCG DAC/TCG mode Operation Recording a Distance- Amplitude Curve Operation Operation Echo evaluation with DAMPING, FREQ.,RECTIF., MTL VEL, Pulser and RejectAmplitude is set to dB Threshold DAC mode TCG mode Measuring thickness PreparationsMeasuring the thickness Storing measured values Data Logger Determining the number of FilesNumber of measurement locations = 2500 Number of Files Selecting a File Clearing Files File Mode Thickness Copy Mode Datalogger MeasureStoring measured values File Number Error Viewing stored readingsClearing the measured values Configuring the USN 52R/ USN 52L Left function group Left Table Value Diam Center Table MEAS.UNITS Right Table Amplitude Amplitude display Graticule Display graticule Freeze Mode Storage mode Intensity Display brightness only USN 52RHigh LOW DB Step Sets step range Gate Logic Setting the gate logic Location Selecting the measurement location File Number Selecting a file File Mode Enabling the Data Logger Value Displaying the measured valueClearing the measured value MEAS. Units Setting the measurement units Language Setting the display language Data set names Data set namesMemo function Data SET Name Entry of a data set name Data SET Direc Data set directory Memo Storing additional information Entering texts Filling in a data header Data set names Issue 05, 02/00 Krautkramer USN 52R/USN 52L Baud Rate Setting the transfer speed Setting the RS232 interfaceLength Setting the length of a byte Parity Parity check Printer type Copy Mode Setting data communicationHard Copy Mode Setting the flaw location calculation Angle Angle of incidence Thickness Material thicknessValue X-value of the probe Displaying the measured values Diam Test object diameter Measure Method of measurement for sound path measurement Setting the measurement methods TOF Measurement mode for time of flight Locking set values Function checkAuxiliary devices Power supply Range Suppression Reject Damping Rectification Gate threshold Thickness measurement Issue 05, 02/00 Krautkramer USN 52R/USN 52L Documentation Printing instrument settings and display contents Copy Mode Documentation Documentation with the PC program UltraDOC Issue 05, 02/00 Krautkramer USN 52R/USN 52L Servicing and maintenance Maintenance of NiCd cells Cleaning the USN 52R/ USN 52LServicing and maintenance Charging NiCd cells Handling AlMn batteries Handling NiCd cells Issue 05, 02/00 Krautkramer USN 52R/USN 52L Interfaces, Peripherals Interfaces Interfaces, PeripheralsSerial interface RS Interfaces, Peripherals Layout of 7 pin Lemo socket RS Layout of 4 pin Lemo socket charger socket, switching output Baud Rate Connection of a peripheral Printing Data Logger report Transferring the display contents Data Logger report format Operation Set Copy Mode to Report Interfaces, Peripherals Transferring measurements values in the Data Logger to a PC Transferring measurement values Transfer formats Printing display contents and instrument settings Byte-No Data Format X.XXX Esccodereturn USN 52R/USN 52L remote operation Interfaces, Peripherals Delay Length Store Sequence of commands of the Memo code Configuring the Memo functionDefining data header Number of fields Example for a header definition Eschn 9RETURN Entering Memo text Lemo Analog outputs Analog voltage for the sound path of an echo RF modeRectified echoes Measure = 0 to 1st TTL switching output Specifications Specifications Echo height resolution Measurement resolutionDisplay rectification Frequency -3dB ranges DAC/TCG Operating temperature Storage temperatureBattery mode Probe connectors Issue 05, 02/00 Krautkramer USN 52R/USN 52L Appendix Appendix Function directory DAC Echo TCG Curve TCGDAC/TCG TCG Damping Rcvr Data SET Preview MEM Data SET MEMFREQ. Rcvr Gain Pulser Puls MTL VEL BasicRecall MEM RECTIF. Rcvr REP-RATE Puls Reject PulsStore MEM Velocity #1 EC Certificate of Conformity Service addresses Krautkrämer GmbH & Co. oHGFrance Japan USA 10-10 Issue 05, 02/00 Krautkramer USN 52R/USN 52L Changes Changes Index Copy Mode DAC 12-4 Issue 05, 02/00 Krautkramer USN 52R/USN 52L Parameter Dump 5-58, 6-3 Parity Reject Krautkramer USN 52R/USN 52L Issue 05, 02/00 12-7 Value Zero 5-13 Zoom key Operating Manual Option DGS R5 TCG/DGS R6 TCG/DGS L4 TCG/DGS L5 TCG/DGS DGS-17 ContentsDGS-29 DGS-6 DGS-4 Issue 02, 03/99 Krautkramer USN 52R/USN 52L Option DGS DGS-5 How to measure with the DGS DGS-7 Overview of the method of proceeding Overview of the DGS menu DGS mode Switch from TCG to DGS modeOverview of the DGS menu Function group DGS mode Gain Menu functions Function table DGS mode PROBE-# ATT-REF Page Operating the DGS Operating the DGS Storing a new probe Operating the DGS Preparing the DGS evaluation Diameter of the equivalent Operating the DGS Carrying out a DGS evaluation Or O Switching off the DGS mode Switching off the DGS mode Storing data Page Codes for remote control Codes for remote control ATT-REF DGS-32 Issue 02, 03/99 Krautkramer USN 5 /USN 52L Option DGS