Epson USN 52L, USN 52R File Number Selecting a file, Location Selecting the measurement location

Configuring the USN 52R/USN 52L Operation

FILE NUMBER Selecting a file

In this function you enter the number of FILES for the Data Logger. You can also select specific measured values here. The indicated functions are:

•ALL CLEAR: No files have been configured

•FILE NUMBER # 1-99:Enter number of files

•ALL FILES: When there are configured files

•EMPTY: (before file number) No reading stored

•ACTIVE: (before file number) Reading stored

•FULL: (before file number) No measurement locations free

Operation:

–Hightlight the right function group in the left function table with I.

–With Mselect the required setting.

HNote:

More detailed information about operation of the Data Logger can be found in Chapter 5.5.

LOCATION Selecting the measurement location

Set the measurement location at which the next mea- sured value is to be stored.

Operation:

–Highlight the right function group in the left function table with I.

–With Mselect the number of the required measurement location.

–If you wish to return to LOCATION 1, press Nand Osimultaneously.

Krautkramer USN 52R/USN 52L Issue 05, 02/00 5-47