Setup Procedure for Firmware Download | Fluke 2625A, 2635A guide

Performance Testing and Calibration	4
Updating 2635A Data Bucket Embedded Instrument Firmware

Firmware downloading may be accomplished by using either of the two methods that are described in the following paragraphs.

∙Default Instrument Firmware Download Procedure

∙Using LD2635 Firmware Loader Directly

Table 4-13. Frequency Calibration

Command

CAL 4

CAL_REF?

CAL_STEP?

Response

+10.000E+3

Action

Put Hydra in Frequency Cal.

Output 2.9 volts ac at 10 kHz from the 5700A. Wait about 8 seconds.

Hydra computes calibration constant 21 and returns the calibrated reading (for example, +10.000E+3.) (For software versions lower than 5.4, this step computes calibration constant 19.)

Note

If the input is incorrect, the "!>" response signifies that a Device Dependent Error has been generated. The calibration step could not be executed.Verify that the input to Hydra channel 1 is the correct value. Also verify that the 5700A is in OPERATE mode. If the input is correct, Hydra may require repair.

Now set the 5700A output to 0V dc.

4-32. Setup Procedure for Firmware Download

Use the following procedure to set up the 2635A and the PC, before attempting to download firmware to the instrument:

1.Copy the files from the diskette to your PC hard drive. All following PC operations should be done in the directory on the PC where these files are located.

2.Using the RS40 Terminal Interface Cable, connect the PC COM port to be used to the 2635A RS-232 port. Use an RS40 and an RS41 cable in series to connect to the COM port on an IBM PC/AT.

3.On the 2635A, press POWER ON. After the initialization process has concluded, use the following procedure to set up communications:

a.Press SHIFT and then LIST(COMM).

b.With ’BAUd’ displayed, use the UP or DOWN arrow key to select’19200’ baud. Then press ENTER.

c.With ’PAR’ (parity) displayed, use the UP or DOWN arrow key toselect ’no’ parity. Then press ENTER.

d.With ’CtS’ displayed, use the UP or DOWN arrow key to selectthe Clear to Send flow control ’On’. Then press ENTER.

e.With ’ECHO’ displayed, use the UP or DOWN arrow key to select’OFF’. Then press ENTER. Communications setup for the 2635A isnow complete.

4-33. Default Instrument Firmware Download Procedure

Use the following procedure to download the version of 2635A instrument firmware that is distributed on the diskette:

4-29

2635A, 2625A specifications

The Fluke 2625A is a sophisticated data logger designed for a wide range of industrial and laboratory applications. This versatile instrument excels in capturing and monitoring temperature and voltage measurements with precision and reliability. One of its standout features is its ability to record data from various sensors, making it ideal for environments where comprehensive data acquisition is critical.

Equipped with a large LCD display, the Fluke 2625A provides clear and user-friendly access to real-time measurement data. Its graphical interface allows users to visualize trends and monitor readings easily, which significantly enhances usability. The device supports a variety of input types and can connect to thermocouples, RTDs, and other sensors, offering great flexibility for various measurement tasks.

The Fluke 2625A employs advanced measurement technologies that ensure accuracy in data logging. With a high sampling rate, it captures fast-changing signals while maintaining data integrity. The device features a built-in memory that allows for extensive logging, accommodating long-term monitoring tasks without requiring constant oversight. Users can set it to log data at specified intervals, offering customizable solutions for different monitoring needs.

Another significant characteristic of the Fluke 2625A is its robust communication capabilities. The device supports USB and RS-232 interfaces for easy connectivity with computers and other devices, making data transfer and analysis seamless. This feature is especially beneficial for users who need to compile or analyze large sets of data quickly.

Furthermore, the Fluke 2625A is designed with durability in mind. Its rugged construction makes it suitable for challenging environments, including those with high levels of vibration, dust, or moisture. This reliability ensures that the device can withstand the rigors of fieldwork while still delivering accurate measurements.

In summary, the Fluke 2625A is a powerful data logger that combines versatility, accuracy, and reliability. Its user-friendly interface, advanced measurement technologies, and robust design make it an essential tool for professionals in various industries, from manufacturing and HVAC to research and development. Whether monitoring temperature changes in a laboratory or assessing voltage levels in an industrial setting, the Fluke 2625A stands out as a trusted solution for effective data logging and analysis.

Fluke 2625A Setup Procedure for Firmware Download, Default Instrument Firmware Download Procedure

Models: 2635A 2625A