Chapter 7 Replacing the Consumables
6 Attach the shaft.
1 Insert the shaft from the slot on the left side.
2 Close the cover.
Confirm that the brake roller is installed properly.
！Otherwise, it may cause feeding errors such as paper jams.
7 Close the ADF.
For details, refer to "1.4 Opening/Closing the ADF" (page 24).
Be careful not to have your fingers caught when the ADF closes.
8 Reset the consumable counter.
Start up the Software Operation Panel and reset the counter. For details, refer to "Resetting the counters" (page 167).
120