Chapter 9 Operational Settings

Item

Description

 

 

Parameter/Value

Factory Default

 

 

 

 

 

 

 

 

 

 

Multifeed

Specify a method for multifeed detection. Detect

None / Check Overlapping (Ultrasonic) / Check

None

(page 180)

multifeeds by monitoring the overlap, document

Length / Check Overlapping and Length

Length: 10 mm

 

length, or the combination of both.

Length (When [Check Length] is specified, select

 

This setting can also be configured from the

 

 

scanner driver's setup dialog box. Note that priority

from 10/15/20 mm)

 

 

is given to the scanner driver setting.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page Edge Filler

Specify a width for the margin around the edge of

ADF:

Top/Bottom/Left/

(ADF)

the scanned image to fill in white or black, according

Top / Left / Right: 0 to 15 mm

Right: 0 mm

Page Edge Filler

to the background color.

Bottom: -7 to 7 mm (in increments of 1)

 

(FB)(*1)

With TWAIN driver, this setting can also be

FB (*1):

 

(page 171)

configured from the scanner driver's setup dialog

 

 

box. In that case, “Page Edge Filler” of the TWAIN

Top / Bottom / Left / Right: 0 to 15 mm

 

 

driver is used on the output image.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A

 

 

B

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(A: image, B: filled area, A+B: output)

 

 

 

 

 

 

 

 

 

 

 

Dropout color

Select a color to be removed from the scanned

Red / Green / Blue / None

Green

(page 173)

image (only available in black & white or grayscale

 

 

 

 

 

 

 

 

 

mode).

 

 

 

 

 

 

 

 

 

With TWAIN driver, this setting can also be

 

 

 

 

 

 

 

 

 

configured from the scanner driver's setup dialog

 

 

 

 

 

 

 

 

 

box. Note that priority is given to the scanner driver

 

 

 

 

 

 

 

 

 

setting.

 

 

 

 

 

 

 

 

 

With ISIS driver, the scanner driver setting is

 

 

 

 

 

 

 

 

 

enabled at all times.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pre-Pick

Select [Yes] to prioritize the processing speed and

Yes / No

Yes

(page 174)

[No] for otherwise.

 

 

 

 

 

 

 

 

 

This setting can also be configured from the

 

 

 

 

 

 

 

 

 

scanner driver's setup dialog box. Note that priority

 

 

 

 

 

 

 

 

 

is given to the scanner driver setting.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

163