Chapter 1 Scanner Overview

1.3 Turning the Power ON/OFF

This section explains how to power on/off the scanner.

The method by which the scanner is powered on/off can be specified from one of the following:

zPress the [Power] button on the operator panel

zUnplug the power cable then plug it back in

zHave the scanner turn on/off in sync with the computer's power

For details, refer to "Method of Turning the Scanner ON/OFF [Power SW Control]" (page 188).

How to Turn the Power ON

When connected via SCSI, turn on the scanner and confirm ！ that "1" is displayed on the Function Number Display before

you turn on the computer.

1 Press the [Power] button on the operator panel.

Check

Function

Send to

Scan /Stop

DThe scanner is turned on, and the [Power] button lights in green. During initialization, the Function Number Display changes in the following order: "8" J "P" J "0" J "1". "1" indicates that the scanner is ready.

When you press the [Power] button, the LED indicator will flash once. Note that this is an initial diagnosis and not a malfunction.

How to Turn the Power OFF

1 Press the [Power] button on the operator panel for more than 2 seconds.

DThe scanner is turned off, and the [Power] button switches off.

23