Chapter 1 Scanner Overview

1.10 Image Scanning Application

This section explains about the bundled “ScandAll PRO” image scanning application, which is used as an example to explain the procedures in this manual.

ScandAll PRO supports both TWAIN and ISIS drivers. By defining scan settings as profiles, you can customize the settings according to your preference.

When ScandAll PRO is installed, you can also install “ScanSnap mode”. This is an add-in application which provides a different set of driver settings as an alternative to using ScandAll PRO. TWAIN driver is required to use this application. Using the ScanSnap mode enables easy scanning with a single button.

You cannot use ScanSnap mode in the following cases: ！ z When the scanner is connected to fi-5000N

z When the scanner is connected with a SCSI cable

"Chapter 5 Various Ways to Scan" (page 66) explains how to scan different types of documents by using examples of the TWAIN driver started via ScandAll PRO.

For more details about ScandAll PRO, refer to “ScandAll PRO V2.0 User’s Guide”.

35