Chapter 9 Operational Settings
9.8 Settings Related to Power ON/OFF
Method of Turning the Scanner ON/OFF | 3 Select one of the following: | |
[Power SW Control] | [Enable power switch] : Press the [Power] button on the operator | |
panel. | ||
|
The method by which the scanner is powered on/off can be specified from one of the following:
z Press the [Power] button on the operator panel z Unplug the power cable then plug it back in
z Have the scanner turn on/off in sync with the computer's power
1 Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page 153).
2 From the listing on the left, select [Device Setting 2] J [Power SW Control].
[Disable power switch] : Unplug the power cable then plug it back in.
[Enable USB power | : Have the scanner turn ON/OFF in sync |
feeding] | with the computer's power. |
Some types of computers and USB hubs keep supplying
！power to the USB bus even after the computer is turned off.
In that case, the [Enable USB power feeding] mode may not work properly.
188