Chapter 5 Various Ways to Scan
3 Start up ScandAll PRO and select the [Scan] menu J [Scanner Setting].
DThe [TWAIN Driver (32)] dialog box appears.
If the [TWAIN Driver (32)] dialog box does not appear, check the setting in ScandAll PRO by selecting the [Tool] menu J [Preferences] to open the [Setup] dialog box, then confirm that [TWAIN] is selected for [Device Driver] in the [Scan] tab.
4 Select
5 Click the [Carrier Sheet] tab and configure settings such as [Image Mode].
6 Click the [OK] button.
DThe settings are saved.
7 Scan the document by selecting the [Scan] menu J [Scan] in ScandAll PRO.
DThe images on the front and back are merged into a single image.
71