Chapter 5 Various Ways to Scan

4 Select [Clipping (Front)] or [Clipping (Duplex)] for [Scan

5 Click the [Carrier Sheet] tab and configure settings such

Type].

as [Image Mode].

Select [Clipping (Front)] for simplex scanning and [Clipping (Duplex)] for duplex scanning.

6 Click the [OK] button.

D The settings are saved.

7 Scan the document by selecting the [Scan] menu J [Scan] in ScandAll PRO.

z The image is output at the center of the page in the ！ size specified in [Paper Size].

z When [Automatic detection] is specified for [Paper Size], the closest standard size is selected from the same drop-down list. Note that the size of the image may become smaller than the original document depending on the document scanned, or part of the image may appear missing.

Example: When an A5 size image is printed in the center of an A4 size document

DThe image is output in A5 size.

To output the scanned image in the actual size of the document, specify the document size for [Paper size].

74