Chapter 9 Operational Settings

9.2 Password Setting

By setting a password, the Software Operation Panel can run in [View Only mode] which allows users to only view the scanner settings.

The scanner settings can be configured if no password is set. In order to prevent unnecessary changes to the settings, a password can be used to restrict user operations.

Setting a Password

Set a password in the following procedure.

1 Right-click the Software Operation Panel icon on the taskbar, and select [Password Setting] from the menu.

2 Enter a new password then again to confirm, and click the [OK] button.

Up to 32 characters can be used for the password.

Note that only alphanumeric characters (a to z, A to Z, 0 to 9) are allowed.

D A confirmation message appears.

3 Click the [OK] button.

D The password is set.

DThe [Password setting] dialog box appears.

154