Chapter 9 Operational Settings

Item

Description

Parameter/Value

Factory Default

 

 

 

 

AutoCrop Boundary

Specify whether or not to optimize (round up/down)

Optimize / Round Down

Optimize

(page 176)

the fractional part of the scanned image data.

 

 

 

 

 

 

Manual-feed timeout

Select whether to disable or enable manual feeding.

Disable / Enable

Disable

(page 186)

 

 

 

Paper-out detection time: Specify the waiting time to

5, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110

10 seconds

 

 

cancel manual feeding.

(seconds)

 

 

 

 

 

Power SW Control

Specify the method by which the scanner is

Enable power switch / Disable power switch /

Enable power

(page 188)

powered on/off.

Enable USB power feeding

switch

 

 

 

 

Paper Protection

Specify whether to enable or disable paper

Enable / Disable

Enable

(page 177)

protection.

 

 

 

Enabling this setting reduces the risk of having the

 

 

 

documents damaged upon feeding errors, by

 

 

 

stopping the scan when the scanner detects a

 

 

 

document that is unusually warped.

 

 

 

Paper protection is disabled in manual feed mode.

 

 

 

This setting can also be configured from the

 

 

 

scanner driver's setup dialog box. Note that priority

 

 

 

is given to the scanner driver setting.

 

 

 

 

 

 

Paper Protection

Specify the level of sensitivity to detect anomalies

Low / Normal / High

Normal

Sensitivity

upon feeding the documents when paper protection

 

 

(page 178)

is enabled.

 

 

 

 

 

 

Feed Mode (*2)

Configure this setting to scan plastic cards with a

Normal / Thick cards (1.25 mm or more)

Normal

(page 179)

thickness up to 1.4 mm when using fi-6140Z/fi-

 

 

 

6240Z (at 200 dpi (60 ppm) in landscape).

 

 

 

 

 

 

*1: Displayed when using the fi-6230Z or fi-6240Z.

*2: Displayed when using the fi-6140Z or fi-6240Z.

165