Chapter 2 How to Load Documents

How to Load Documents

1 Pull out the chute extensions according to the length of the document.

For details, refer to "1.6 Setting Up the ADF Paper Chute" (page 26).

2 Lift the stacker and stacker extension according to the length of the document.

For details, refer to "1.7 Setting Up the Stacker" (page 27).

3 Load the document face-down in the ADF paper chute.

4 Adjust the side guides to the width of the document.

Do not leave space between the side guides and the document. Otherwise, the document may be fed skewed.

Side guide

5 Start up an application for scanning and perform a scan.

For details about the scanning procedure in ScandAll PRO, refer to "ScandAll PRO V2.0 User’s Guide".

Remove all paper clips and staples. Reduce the number

！of sheets if a multifeed or pick error occurs.

39