Chapter 2 How to Load Documents

Fig. 1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

z Accuracy of multifeed detection may drop with some

 

 

 

 

 

 

 

 

 

 

 

documents.

 

 

 

 

35

 

 

 

 

 

Reference point

 

 

 

 

 

 

 

Multifeed cannot be detected for the top 30 mm of a

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Top

 

 

document.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

z For the shaded area in Fig. 1, you can also specify a length

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

not to detect multifeeds in the Software Operation Panel.

 

 

 

 

 

 

 

 

 

 

 

For details, refer to "9.6 Settings Related to Multifeed

 

Front side

 

 

 

 

 

 

 

 

 

Detection" (page 180).

 

 

 

 

 

 

 

 

 

 

 

 

Feed direction

Bottom

Center (Unit : mm)

zThe above condition applies when the document is set to

！the center of the pick roller width.

zWhen you use detection by overlapping, scanning thick documents such as plastic cards will be falsely detected as multifeed. In that case, disable multifeed detection.

46