Chapter 9 Operational Settings
9.5 Settings Related to Scanning
Adjusting the Position to Start the Scan | 2 From the listing on the left, select [Device Setting] and |
[Offset/Vertical magnification Adjustment] | click the [Offset] button. |
When the output position of the scanned image is not correct |
|
or the image appears shortened/elongated (vertically), adjust |
|
the offset and the vertical magnification in the following |
|
procedure. |
|
Normally, you should not have to make any adjustments as the ！ factory default settings are configured at appropriate values.
1 Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page 153).
169