Chapter 9 Operational Settings
9.6 Settings Related to Multifeed Detection
Specifying a Multifeed Detection Method | 2 From the listing on the left, select [Device Setting 2] J |
[Multifeed] | [Multifeed]. |
Multifeed is an error where two or more sheets are fed through |
|
the ADF at once. It is also called a multifeed when a different |
|
document length is detected. |
|
Not noticing multifeed errors while scanning may put you in a |
|
situation where important data are missing from the scanned |
|
images. Multifeed detection can be used to prevent such |
|
troubles. When this function is enabled, an error message is |
|
displayed as soon as it detects a multifeed, and stops the |
|
scan. Note that multifeed cannot be detected within 30 mm |
|
from the leading edge of the document. |
|
1 Start up the Software Operation Panel. |
|
Refer to "9.1 Starting Up the Software Operation Panel" (page 153).
180