Chapter 9 Operational Settings
Protecting the Documents from Being Damaged | 3 Specify whether to enable or disable paper protection. | ||
[Paper Protection] |
| When you select [Enable], the scanner stops the scan when it detects | |
| a document that is unusually warped. | ||
Specify whether to enable or disable paper protection. |
|
|
|
| ！ | z Note that paper protection is a function that | |
Feeding errors during scanning could damage or tear valuable |
| ||
| suppresses the documents from being damaged, and | ||
documents. |
|
| does not guarantee all documents to be saved. |
Enabling this setting reduces the risk of having the documents |
|
| z When you enable paper protection, make sure to set |
|
| the documents with their top edges aligned (especially | |
damaged upon feeding errors, by stopping the scan when the |
|
| |
|
| for a mixed batch with different lengths). | |
scanner detects a document that is unusually warped. |
|
| If the top edges are not aligned properly, the paper |
This function can be used to scan documents such as thin |
|
| protection function may be activated and stop the scan |
|
| even when the documents are being fed correctly. | |
papers which are difficult to feed. |
|
| |
|
|
| |
|
|
| |
1 Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page 153).
2 From the listing on the left, select [Device Setting 2] J [Paper Protection].
zPaper protection is disabled in manual feed mode.
zThis setting can also be configured from the scanner driver's setup dialog box. Note that priority is given to the scanner driver setting.
177