1.2 Parts and Functions
This section shows the names of the scanner parts.
■Front
Side guide
Guides the documents in width direction as they are fed into the scanner.
ADF (Automatic Document Feeder)
Pulls and feeds the documents one sheet at a time from the ADF paper chute. Open to replace consumables or clean the inside of the scanner.
Stacker
Stacks up the ejected documents.
Stacker extension 1
Slide out to adjust to the document length.
Stacker extension 2
Lift up to adjust to the document length.
Stacker extension 3
Lift up to adjust to the document length.
ADF paper chute
Holds the documents to be scanned.
Chute extension 2
Pull out to adjust to the document length.
Chute extension 1
Pull out to adjust to the document length.
ADF release tab
Pull this tab to open the ADF.
Operator panel
Consists of the Function Number Display, buttons, and LED indicator.
Can be used to operate the scanner or check the status.
For details, refer to "Chapter 4 How to Use the Operator Panel" (page 63).
16