Chapter 9 Operational Settings
Specifying the Sensitivity Level for Paper | 3 Specify the sensitivity level. | |
Protection [Paper Protection Sensitivity] | Low | : Decreases the sensitivity level to detect warped |
|
| documents. |
|
| |
You can specify the level of sensitivity to detect anomalies upon feeding the documents when paper protection is enabled.
Documents are deformed (e.g. warped, bent, creased) when they are not being fed by the rollers properly. To detect such a symptom and stop the scan, select [Low] to only detect documents that are highly deformed, and [High] to also detect documents that are slightly deformed.
Normal | : Monitors the documents in normal sensitivity. | ||
|
|
| Keep this setting for normal use. |
High | : Increases the sensitivity level to detect warped | ||
|
|
| documents. |
|
|
|
|
|
|
| If paper jams occur frequently, specify [Low]. |
|
|
|
|
|
|
|
|
1 Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page 153).
2 From the listing on the left, select [Device Setting 2] J [Paper Protection Sensitivity].
178