Chapter 7 Replacing the Consumables

7 Attach the shaft.

1Insert the right end of the shaft into the slot, and lower the other end gradually.

Shaft

2 Rotate the bushing to lock the shaft.

Bushing

Shaft

3Close the sheet guide. Make sure that both ends of the sheet guide are locked firmly.

Confirm that the pick roller is installed properly.

！Otherwise, it may cause feeding errors such as paper jams.

8 Close the ADF.

For details, refer to "1.4 Opening/Closing the ADF" (page 24).

Be careful not to have your fingers caught when the ADF closes.

9 Attach the ADF paper chute.

Insert the tabs into the slots on the back of the scanner, and tilt the ADF paper chute backwards until it locks in place.

Side guide

Tab

ADF paper chute

2 1

10 Reset the consumable counter.

Start up the Software Operation Panel and reset the counter. For details, refer to "Resetting the counters" (page 167).

123