3. SETTING AND ADJUSTMENT
3.7.3Choosing External Radar (image source)
Select the external radar to use in the dual radar display.
1.Open the INITIALIZE menu.
2.Press the [3] key to show the SCANNER menu.
3.Select 9 [DUAL RADAR] and push the left button.
[DUAL RADAR]
1BACK
2DUAL RADAR OFF/ COMBINE
3COMBINE MODE OWN/EXT
4COMBINE SECTOR START 000° ANGLE 000°
5COMBINE RANGE START 00.00NM LENGTH 00.00NM
6EXT RADAR 1/2/3/4
4.Select 6 EXT RADAR and push the left button.
5.Select desired radar no. and push the left button.
Only the numbers of connected radars are valid. Radar no. is set on the Installation Setting menu.
6.Press the [MENU] key to close the menu.
