1. MOUNTING
Antenna unit assembling
The antenna radiator and the antenna housing are shipped in separate packages. Assemble them as below. The antenna unit may be assembled before hosting it to the mounting platform. However, do not lift the antenna unit by the radiator.
Antenna unit assembling procedure
1.Screw the guide pins (2 pcs.) in the radiator.
2.Remove the protective cap from the choke guide and radiator.
3.Grease
4.Place the radiator on the radiator bracket. (Radiator direction is shown by the logo on the bracket. If reversely oriented the radiator cannot be set to the bracket.)
5.Loosely fix the radiator to the radiator bracket with hex bolts (M10x25), spring washers and flat washers.
6.Remove the guides pins and tighten hex bolts.
Antenna radiator
Radiator front
Guide pin (2 pcs.)
Arrow mark for the radiator front.
Assembling the radiator bracket
CAUTION
Be sure to remove the guide pins after fixing the radiator.
Injury may result if the guide pins loosen and fall.
