Furuno 2137S-BB, 2837S To change the cable entry, RCU-015/016 Changing cable entry

1. MOUNTING

To change the cable entry

To change the cable entry from the side (default) to the bottom, modify the unit as shown below.

Screw M3X8 (Torque 0.78Nm)

3.Pass the cable from this hole.

4.In here, clamp the copper part of the cable with the cable clamp removed at step1.

Bottom of the unit

2. Pull out the cable.

Cable clamp 03-163-7804

Screw M4X8 (Torque 1.47Nm)

1. Remove the cable clamp.

(Torque 1.47Nm)

J522: If you connect RCU-016 in series with RCU-015, plug in here.

RCU-015/016: Changing cable entry

1-17