
Outgoing Calls
Automatic Redial1
u
ÕÔ
AUTO REDIAL CALL
ANDERSEN A 200
Lift the handset when you are called back.
(You can also press the Line or Loudspeaker key to answer in handsfree mode.)
Notes: It is not possible to do a new request on a key holding an already activated request until the existing one is cancelled.
When the Automatic Redial lamp is rapidly flashing, your telephone is busy and you cannot receive or make new calls.
The number of redial attempts and how long the function is active is programmed by your system administrator.
If you have activated a diversion on your telephone, this function is not available.
If Tandem configuration is activated, the secondary telephone cannot use this function. See section “Tandem configuration” on page 78.
Cancel
Press the relevant programmable key to cancel the Automatic Redial request
Note: Depending on system programming, the Automatic Redial request could be cancelled automatically.
Pause auto redial
Pause auto redial
Ô
ÕÔ
Pause
It is possible to pause all of your successfully activated requests by programming a separate pause key, see section “Program a function” on page 88.
Press to pause (pre-programmed).
The requests are paused and the key lamps of the Automatic Redial keys are flashing slowly.
Press to resume Automatic Redial (pre-programmed).
BusinessPhone – Dialog 4222 Office / Dialog 3211 & 3212 | 25 |