HP 100 COLOR MFP M175 manual Control panel message, Description, Recommended action, Print failure

Control panel message	Description	Recommended action
Print failure	The product experienced an internal	1.	Turn off the power by using the power
	communication error.		switch.
		2.	If a surge protector is being used,
			remove it. Plug the product directly into
			the wall socket.
		3.	Wait at least 30 seconds, and then turn
			on the power and wait for the product
			to initialize.
		4.	If the error persists, contact HP. See
			www.hp.com/support/
			LJColorMFPM175 or the support flyer
			that came in the product box.
Printing...	The product is too hot to continue printing at	The product will pause longer between
Cool-down mode	normal speed.	printed pages until it cools down.
		Overheating occurs when the product lacks
		air ventilation or when it prints continuously
		for a long period of time. To prevent
		overheating, place the product in a well-
		ventilated area, and divide very large print
		jobs into smaller print jobs.
Remove shipping material from rear door	Shipping material remains on the back of	Open the rear door and remove all shipping
	the product.	material.
Resend Upgrade	A firmware upgrade was interrupted.	Resend the upgrade file to the product.
Scanner Error X	The product experienced a general scanner	1.	Turn off the power by using the power
	error.		switch.
		2.	If a surge protector is being used,
			remove it. Plug the product directly into
			the wall socket.
		3.	Wait at least 30 seconds, and then turn
			on the power and wait for the product
			to initialize.
		4.	If the error persists, contact HP. See
			www.hp.com/support/
			LJColorMFPM175 or the support flyer
			that came in the product box.
Sensor Error	The product experienced a paper sensor	1.	Turn off the power by using the power
	error.		switch.
		2.	If a surge protector is being used,
			remove it. Plug the product directly into
			the wall socket.
		3.	Wait at least 30 seconds, and then turn
			on the power and wait for the product
			to initialize.
		4.	If the error persists, contact HP. See
			www.hp.com/support/
			LJColorMFPM175 or the support flyer
			that came in the product box.
Settings cleared	The product has cleared job settings.	Re-enter any appropriate job settings.

146 Chapter 13 Solve problems ENWW