HP 100 COLOR MFP M175 Enww, Interpret control panel messages, Control panel message, Description

Control panel message	Description	Recommended action
52 Scanner Error	The product has experienced a scanner	1.	Turn off the power by using the power
Turn off then on	error.		switch.
		2.	If a surge protector is being used,
			remove it. Plug the product directly into
			the wall socket.
		3.	Wait at least 30 seconds, and then turn
			on the power and wait for the product
			to initialize.
		4.	If the error persists, contact HP. See
			www.hp.com/support/
			LJColorMFPM175 or the support flyer
			that came in the product box.
79 Error	The product has experienced a firmware	1.	Turn off the power by using the power
Turn off then on	error		switch.
		2.	If a surge protector is being used,
			remove it. Plug the product directly into
			the wall socket.
		3.	Wait at least 30 seconds, and then turn
			on the power and wait for the product
			to initialize.
		4.	If the error persists, contact HP. See
			www.hp.com/support/
			LJColorMFPM175 or the support flyer
			that came in the product box.
ADF door is open	The document feeder door is open.	Close the document feeder door.
Device error	The product experienced an internal	1.	Turn off the power by using the power
Press [OK] to continue	communication error.		switch.
		2.	If a surge protector is being used,
			remove it. Plug the product directly into
			the wall socket.
		3.	Wait at least 30 seconds, and then turn
			on the power and wait for the product
			to initialize.
		4.	If the error persists, contact HP. See
			www.hp.com/support/
			LJColorMFPM175 or the support flyer
			that came in the product box.
Doc. feeder jam	The product has experienced a document	Clear the document feeder jam.
	feeder jam.

ENWW Interpret control panel messages 143