Operating in Demo Mode

With the library in Demo Mode (demonstration mode), the hand takes a data cartridge from a storage cell, moves the cartridge, and places the cartridge back into a different storage cell.

Caution Audit update required: If DEMO MODE is interrupted, Get-Put Loop operations will become disrupted, and cartridges may not be returned to their original locations. When DEMO MODE completes, you must IPL to re-audit the library, and your backup software applications . You must then notify the customer to update the host cartridge database.

To operate in Demo Mode:

1.Ensure the library and drives are not in use.

2.Press the [MENU] button until the Main Menu displays.

3.Press the arrow buttons until the cursor underscores DIAGNOSTICS.

4.Press the [SELECT] button.

The panel displays the Main Diagnostics menu.

5.Press the arrow buttons until the cursor underscores DEMO MODE.

6.Press the [SELECT] button.

The Demo Mode menu appears.

7.Use the arrow buttons to enter the desired number of loops. The up arrow button increases the value by 100; the down arrow button decreases the value by 100.

Note

HP does not recommend looping tests excessively.

 

 

118 Operating in Automated Mode

Chapter 4