Viewing the Ethernet Address

This is a six-byte address, unique to each library. The address is written into the MPC card at the factory and cannot be changed. An example of an Ethernet address is 00:10:4f:00:05:01.

To view the Ethernet address:

1.At the Main Configuration Menu, press the arrow down button to line up the cursor with NETWORK CONFIG.

2.Press the [SELECT] button.

The Network Config Menu will appear and the library’s Ethernet address appears at the bottom of the screen.

3.If you have already changed the library’s SCSI ID and are planning to exit the main Configuration Menu at this time, you must press the [RESET] button. If you wish to set other configuration values, continue with the next section.

If you have not changed the library’s SCSI ID and are not setting other configuration values, press the [MENU] button until you exit all menus.

80 Entering Configuration Data

Chapter 3