Setting the Date
Set the date and time from the Lib Config Menu:
1.At the Lib Config Menu screen, press the arrow button until the cursor underscores DATE.
2.Press the [SELECT] button. An editing screen appears.
3.On the editing screen:
a.Press the up and down arrow buttons to select a value for each portion (field) of the date.
b.Press the [SELECT] button to move right to the next field.
c.Press the [MENU] button to move left to the previous field.
4.When the screen displays your desired setting, press the [SELECT] button from the
5.If you have already changed the library’s SCSI ID and are planning to exit the main Configuration Menu at this time, you must press the [RESET] button. If you wish to set other configuration values, continue with the next section.
6.If you have not changed the library’s SCSI ID and are not setting other configuration values, press the [MENU] button until you exit all menus.
Setting the Time
Set the time from the Lib Config Menu. FSC log entries correspond to this time setting:
1.At the Lib Config Menu screen, press the arrow button until the cursor underscores TIME.
2.Press the [SELECT] button. An editing screen appears.
3.On the editing screen:
a.Press the up and down arrows to select a value for each portion (field) of the time.
b.Press the [SELECT] button to move right to the next field.
c.Press the [MENU] button to move left to the previous field.
74 Entering Configuration Data | Chapter 3 |