Note | For cleaning cartridge information specific to your drive type, |
| |
|
|
After a predetermined count, a cleaning cartridge must be replaced.
Note | The Auto Clean feature is automatically enabled if you insert |
| even one cleaning cartridge into the reserved cell area and then |
| reset the library. |
|
|
If the Auto Clean feature is enabled, use the operator panel to set the maximum number of times a cleaning cartridge can be used (see Table 5 on page 88).
Table 5 | Cleaning Cartridge Warning Counts | |
|
|
|
| Cleaning Cartridge Type | Recommended Warning Counts |
| (maximum) | |
|
| |
|
|
|
| LP LTO Ultrium | 15 uses |
|
|
|
| LP LTO Ultrium | 50 uses |
| (universal) |
|
|
|
|
| DLT 8000 | 20 uses |
|
|
|
| 9840 | 100 uses |
|
|
|
Note | With 3.00 firmware and higher, an asterisk (*) may appear on |
| the operator panel display. For example, HP A5597A (Code |
| 3.00.xx)*. The asterisk (*) denotes the cleaning cartridge’s life |
| has expired. To determine which cartridge has expired and to |
| eject the expired cartridge, see For cleaning cartridge |
| information specific to your drive type, see Drives and Media |
| |
| |
|
|
88 Entering Configuration Data | Chapter 3 |