You set the cleaning cartridge warning count from the main menu screen. To set this number:
1.From the online status screen, press the [MENU] button. The main menu screen will appear.
2.Press the arrow button until the cursor lines up with CLEANING INFO.
3.Press the [SELECT] button.
The CLEANING INFO screen will appear. It displays the number of cleaning cartridges in the reserved area at initialization.
4.Press an arrow button until the cursor is at the appropriate drive’s WARN COUNT.
5.Press the [SELECT] button for your choice.
An editing screen will appear. The editing screen will display the current setting for the cartridge warning count. The maximum recommended warning count is shown below the current setting.
6.Press the arrow buttons to change the warning count.
7.Press the [SELECT] button to save the changes. (You may press the [MENU] button to abort.)
8.Press the [MENU] button to return to the library status screen.
3 Chapter
Chapter 3 | Entering Configuration Data 89 |