Setting the

Secondary DNS

Server’s IP Address

Note

You may press the [MENU] button from the left-most field to

 

abort.

 

 

The third entry you may make is the secondary DNS server’s IP address.

Note

The secondary DNS server’s IP address is available for sites that

 

have a secondary (or backup) server. If your site does not have a

 

secondary server, this entry is not required.

 

 

1.Press the arrow button until the cursor underscores SVR Secondary.

2.On the editing screen:

a.Press the up and down arrow buttons to select a value for each number in the secondary domain server’s IP address.

b.Press the [SELECT] button to move right to the next field.

c.Press the [MENU] button to move left to the previous field. Press the [SELECT] button. An editing screen appears.

3.When the screen displays your desired setting, press the [SELECT] button (from the right-most field) to save the changes.

Note

You may press the [MENU] button from the left-most field to

 

abort.

 

 

If you are planning to exit the Main Configuration Menu at this time, you must press the [RESET] button. If you wish to set other configuration values, continue with the next section.

If you have not changed the library’s DNS configuration and are not setting other configuration values, press the [MENU] button until you exit all menus.

86 Entering Configuration Data

Chapter 3