The Cleaning Info menu provides information about and control of the library’s cleaning cartridges. It enables you to change the warning count for each type of cleaning cartridge. Figure 12 on page 47 shows an example of the Cleaning Info menu:
NUM CLEAN | The total number of cleaning cartridges |
CARTRIDGES | mounted in the reserved cells within the library |
|
|
DLT WARN COUNT | The number times you want the DLT cleaning |
| cartridge to be used before the library exports |
| it through the CAP (20 uses) |
|
|
9840 WARN COUNT | The number times you want the 9840 cleaning |
| cartridge to be used before the library exports |
| it through the CAP (100 uses) |
|
|
HP LTO WARN COUNT | The number of times you want the Ultrium |
| cleaning cartridge to be used before the |
| library exports it through the CAP (15 uses) |
| Note: The Ultrium universal cleaning cartridge |
| has a maximum of 50 uses. |
|
|
EXPORT | A procedure for moving cleaning cartridges |
CARTRIDGES | from the reserved cells to the CAP |
|
|
IMPORT | A procedure for moving cleaning cartridges |
CARTRIDGES | from the CAP to the reserved cells |
|
|
CLEAN CARTRIDGE INFO | A path to an information screen that lists all |
| cleaning cartridges in the library |
|
|
The Cleaning Info menu lets you change the warning count for each type of cleaning cartridge and import/export cleaning cartridges. It also lets you check the number of times a cleaning cartridge has been used. For procedures, see Library Operation on page 93.
46 Operator Panel | Chapter 2 |