Entering Configuration Data

After the IPL is complete, the status screen will appear on the operator panel. At this point, you must make choices about your library, drives, and network and enter those choices into the library’s memory.

Note

You may need to consult with your systems administrator for

 

some information.

 

 

You may enter all configuration data through the operator panel. See Operator Panel Entry (in the following section) for specific instructions. Using the Web-Based Library Administrator, you also can enter some configuration data through a workstation or a PC that is running a Netscape or Microsoft browser. For more information, access the online help files for the Web-Based Library Administrator. They are available from the CD-ROM that shipped with your product, or you can download them from www.hp.com/go/support.

Operator Panel Entry

Entering configuration data through the operator panel prepares the library for operation. For a detailed description of the operator panel, see Operator Panel on page 34.

Library Entries

Four entries are required for a library—other entries will vary with your options:

■Library SCSI ID

■Drive Fast Load enable/disable

■Date

■Time

70 Entering Configuration Data

Chapter 3