To load a cartridge into a DLT drive:
1.Open the tape library right front door by pulling on the left side of the door.
2.Open the library left front door by using a latch key to unlock both locks. See Figure 32 on page 123. Turn the key counter clockwise to unlock them, then pull open the door.
3.Locate the cartridge (see Locating a Cartridge in the Storage Cells on page 127).
4.Make sure the DLT handle is up (see Figure 37 on page 133) and the Operate Handle indicator is steadily on.
Note | If the handle is in the down position, wait for the Operate |
| Handle indicator to remain on steadily before moving it to the |
| up position (see Figure 37 on page 133). If the Operate Handle |
| indicator is flashing while the handle is up, move the handle to |
| the down position and wait for the Operate Handle indicator to |
| remain on steadily. Then move the handle to the up position. |
|
|
132 Manual Operation | Chapter 4 |