Caution Potential equipment damage: You must insert the cartridge properly or you will damage the drive. Use only DLT cartridges for DLT drives. Make sure the cartridge has a readable VOLSER label.
5.Hold the cartridge so that the VOLSER label is facing you and the write protect switch is on the right side of the cartridge, as shown in Figure 38 on page 134.
6.Insert the cartridge into the drive and push the cartridge into the back of the drive until it is firmly seated.
7.Lower the drive handle.
Figure 38 | Loading a Cartridge into a DLT Drive |
C65137
134 Manual Operation | Chapter 4 |