4.When the screen displays your desired setting, press the [SELECT] button from the right-most field to save the changes. (You may press the [MENU] button from the left-most field to abort.)

5.If you have already changed the library’s SCSI ID and are planning to exit the main Configuration Menu at this time, you must press the [RESET] button. If you wish to set other configuration values, continue with the next section.

6.If you have not changed the library’s SCSI ID and are not setting other configuration values, press the [MENU] button until you exit all menus.

Setting the Web Password

If your library uses the Web-Based Library Administrator, you must set a Web password at the operator panel. For instructions on setting this value, see Web Password on page 56 and the Web-Based Library Administrator Online Help CD that shipped with your library.

3 Chapter

Chapter 3

Entering Configuration Data 75