Table 8 on page 98 summarizes drive status messages that might appear on the library status screen:
Table 8 | Drive Status Messages |
|
|
|
|
| Message | Explanation |
|
|
|
| INIT REQUIRED | You must initialize this drive. |
|
|
|
| NOT CONNECTED | This drive is not connected to a SCSI bus. |
|
|
|
| UNKNOWN DRIVE | The library does not recognize the type of drive in |
|
| this location. |
|
|
|
| NOT COMMUNICATE | This drive is not communicating with the client or |
|
| the drive power is off. |
|
|
|
| NOT FUNCTIONAL | This drive is not operating properly. |
|
|
|
| NOT LOADABLE | The library cannot load a cartridge into this drive. |
|
|
|
| EMPTY | This drive does not have a tape loaded. |
|
|
|
| CARTRIDGE IN | The drive contains a cartridge, but the cartridge is |
|
| not loaded into the drive. |
|
|
|
| CLEAN NEEDED | This drive requires cleaning. |
|
|
|
| CLEAN FAILED | The attempt to clean this drive failed. |
|
|
|
| LOADING | The library is mounting a cartridge to this drive. |
|
|
|
| REWOUND | The cartridge in this drive has been rewound. |
|
|
|
| UNLOADING | The library is dismounting a cartridge from this |
|
| drive. |
|
|
|
| LOADED | The library has loaded a cartridge into this drive. |
|
|
|
| REWINDING | The cartridge in this drive is being rewound. |
|
|
|
| BUSY | This drive is performing a read or write operation. |
|
|
|
| CLEANING | The drive is being cleaned. |
|
|
|
98 Operating in Automated Mode | Chapter 4 |